UC知道蓝屏问题求助`~~~
来源：百度知道 编辑：UC知道 时间：2024/06/01 06:15:42
蓝屏后显示的是
a problem has been detected and windows has been shut down to prevent damage to your computer
PAGE_FAULT_IN_NONPAGED_APEA
if this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps:
check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need
if problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options and then select Safe Mode
Technical information:
*** STOP:0x00000050(0xf8db14c2,0x0000000,0x805422a4,0x00000000)
能帮偶解答下么`？
a problem has been detected and windows has been shut down to prevent damage to your computer
PAGE_FAULT_IN_NONPAGED_APEA
if this is the first time you've seen this stop error screen,restart your computer. If this screen appears again,follow these steps:
check to make sure any new hardware or software is properly installed. If this is a new installation,ask your hardware or software manufacturer for any windows updates you might need
if problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced Startup Options and then select Safe Mode
Technical information:
*** STOP:0x00000050(0xf8db14c2,0x0000000,0x805422a4,0x00000000)
能帮偶解答下么`？
不可能是内存问题,内存如果有问题的话那么连进检测界面都进不了,还会发出警报声音.
所以不可能是内存问题.
解决方法:
第一,重新安装系统.(你的显卡驱动出问题,用GHOST安装系统,快点,因为这样装系统只要几分钟,只用来检测是否系统问题,如果是的话,你在用安装光盘安装系统吧,这样的系统比较安全稳定.)
第二:如果重新安装后还是这样的话(那你就尝试用另一个显卡吧)
我帮过很多客户修理过这类的问题了!!
应该不会出错的!!
内存坏了！ 有时候不是整个坏，而是某个点坏！
建议换内存了！
你所列出的上面显示的是无页面文件，可能是硬盘上的数据损坏，也有可能是内存原因。希望下面的代码可以帮助你
windows蓝屏错误小全
0 0x00000000 作业完成。
1 0x00000001 不正确的函数。
2 0x00000002 系统找不到指定的档案。
3 0x00000003 系统找不到指定的路径。
4 0x00000004 系统无法开启档案。
5 0x00000005 拒绝存取。
6 0x00000006 无效的代码。
7 0x00000007 储存体控制区块已毁。
8 0x00000008 储存体空间不足，无法处理这个指令。
9 0x00000009 储存体控制区块地址无效。
10 0x0000000A 环境不正确。
……
还有很多，你可以上网找找
你重启电脑后,F8进安全模式进的去吗?进去系统了就说明你内存没有坏.然后看看你的硬件驱动和硬件设置,再查查病毒等.